Strobe Play left with natural light........

have to say this article's wedding photography ideas identified just comes to play with natural light strobe, because if everything is artificial, we can go to the Studio, turning off the lights out spoiled that.
about ex officio when shooting Strobe 99% tips is at the machine press the get mode, to avoid the jump run will produce a picture "looked at the start", but the mode A and S is also a great tool for us to use for the purpose of metering
specific details about the metering body watch those part 2
here in part 3 Please 1 Summary specifically process steps are as follows
switch it up
put the eyes on the viewport, check the information that we want to get on site picture
If you shoot at night, shimmering tune the Bokeh are willing to take the machine on the A mode, open the export to, or used telephoto lens > 100 mm (telephoto lens use with tripod), put the metering points to each position of the background-foreground to test light, the machine will automatically metering out for speed, and this speed should be between 1/x-1/X (with 200 > is the focal length of the lens is If you do not have the tripod), if beyond this range should regulate more about ISO (ISO increase comfort due to Noise not bad when enough light, Noise bad only when lack of light)
If you take the morning want to grab it, then adjust the machine on the S mode, set the default speed is 1/200, then put the machine on the point in the sky that metering, if strong sunlight should to ISO 100-200 is the maximum, the machine will automatically calculate the proper aperture
After step 3, we had the specific parameters for ISO, Password, Speed of light to get the details all around, and of course our subject must be in a position to "go dark", if not then we don't need Strobe Lights do, in step 4 we adjust the mode to M, and set password, speed, Iso according to the light in which I have measured in bring it on 3.1 or 3.2.
put the lamp into place towards the subject (how light direction depending on the your decision if you want lighting effects on the face of it that would)
connect the lights with the camera (via wire or wireless)
If you have bulk metering equipment shall be brought into check by the parameter set 1 password or speed on the metering coincides with the body, and to Flash to refine light intensity to when parameters longer lai also coincides with the body

If you do not have removable metering device then you have only one way: take a tried and tested.
the breeze has just taken with the owner if the owner is the person who
The example illustrates with 3.1 mode (iso 800 used the Sb900 lights)
The example illustrates with 3.2 (Iso 100, Photon light 600W)